At present, our seamless fire extinguisher bottle is the company's main fire extinguisher component. It is manufactured using one-time pouring technology. The seamless fire extinguisher cylinder produced will not be cracked or leaked for some external or internal reasons. The phenomenon.

This ensures the safe use of fire extinguishers. In fact, this is a type of cylinder. We are no stranger to cylinders. Many gases in life require cylinders.

Steel cylinders are steel cylinders for storing high-pressure oxygen, coal gas, and petroleum liquefied gas. Safe storage and transportation of gas cylinders Steel cylinders are usually filled with permanent gas, liquefied gas or mixed gas. Gas cylinder filling unit, gas cylinder inspection unit, gas cylinder usage list includes factories, laboratories, hospitals, schools, disease control centers, electronics rooms, clean rooms, industrial institutions, etc., cylinders of gas cylinders and gas cylinder distribution units Management needs to be improved urgently, and safety management of gas cylinders for transportation and storage should be strengthened.

However, it is necessary to abide by the principle of use when using it to ensure safe use.

1. When using a high-pressure gas cylinder, the operator should stand in a position perpendicular to the interface of the gas cylinder. It is strictly forbidden to knock during operation, and check for leaks frequently. Pay attention to the pressure gauge reading.

2. Oxygen or hydrogen cylinders should be equipped with special tools, and contact with oil is strictly prohibited. Operators should not wear clothing gloves that are contaminated with various greases or are sensitive to static electricity, as this may cause combustion or explosion.

3. High-pressure gas cylinders must be stored in separate places and kept securely when standing upright; cylinders should be kept away from heat sources to avoid exposure and strong vibration; generally, the amount of cylinders stored in the laboratory should not exceed two bottles.

4. On the shoulder of the cylinder, use the steel seal to mark the following manufacturing date of the manufacturer. Gas cylinder model Working pressure and pressure test Date of pressure and pressure test, date of next inspection, gas volume, and cylinder weight. In order to avoid confusion when using various cylinders, the cylinders are often painted with different colors and the gas name in the cylinder is written.

5. Technical inspections of various gas cylinders must be carried out regularly. Cylinders filled with general gas are inspected once every three years; if severe corrosion or serious damage is found during use, inspection should be performed in advance.

6. The pressure reducer used on the high-pressure gas cylinder must be classified and used exclusively. The screw must be screwed tightly during installation to prevent leakage; the pressure reducer and the on-off valve must be opened slowly when they are opened and closed; Open the pressure reducer afterwards; after use, close the on-off valve first, and then close the pressure reducer after exhausting the remaining air. Never turn off the pressure reducer without closing the on-off valve.

These are special points. Steel cylinders are very useful, but knowing how to use them is a prerequisite to determine the service life of the cylinders and the safety of users.